An overview of remote controllers for all Hovmand lifters
Are you looking for this guide in French?
40010062
– 2 buttons with 3-pin plug.
Add-on kit consists of chassis plug with wires 84280044 and a remote 84280027 with 3-pin plug.
Was an option on special Lifters Impact 80 and some elder Impact 130 before January 2017.
Use article no 8428007 when ordering a remote as spare part.
84290030
is used for INOX 90, INOX 200, Impact 90 and for Impact 130 and 200 lifters after January 2017.
Also used for Lifters INOX MAXI 100, INOX MAXI 140, MEGA 200 with Electric tool Click for bowls.
Plug is 8-pin. Does not fit the plug for 40010062!
84290031
has 8 buttons and 8-pin plug.
Used only for lifters with electric tool VER, QC3, QC6, EG6, EG8. Impact 200-3 (from January 2017), INOX 200-3, Impact 130-3, Inox 90-3, INOX 30-80
TT-24010
Is with 8 buttons and no plug. The cable is mounted directly into the control box.
Used only for lifters with electric tool VER, QC6, EG6, EG8 on elder models E-130, E-160, E-300. Elder models of Flexlift 30-80.
Stickers on the remote is added according to the tool system.
TT-TR21 and TT-TR27
TT-TR21 Remote is with 4 buttons.
TT-TR27 is with 2 buttons.
No plug.
The cable is mounted directly into the control box on elder Lifters like E80, E130, E300.
84280028
Special edition for up/down with 2-speed. Only possible on lifters with custom made control box. Remote with 4 buttons and 5-pin plug. Set contains remote 84290040 and 5-pin chassis plug 84030017.
Rewieved 11/1-22. MH