1. Knowledge Base
  2. Repairs & Service Guides

Replacing charger

Charger of Impact 80-90-130-200

Are you looking for this guide in French?

Yes, please.👍

This guide only goes for Impact Models with built-in charger.
Disconnect the control box and place it on a table or box near the Lifter.
You need 4-6 cable ties of 200mm length and 2,5mm thickness.
Tools: Torx 20, Insex screw driver 2mm, Wire Cutter.
Charger item no 84020020 for models before october 2021.
Item no 84020071 for newer versions.

HubSpot Video